Type 99 Channel Data:                                                1 of 2

The tone table and type(s) of decode may be programmed in this window.
Each channel may be configured with up to three types of decoding per 
table.

To enable Type 99 decode on a channel:

     1.  Move the cursor to the table field for the channel in question.
     2.  Press Tab to toggle the response to the appropriate tone table.
     3.  Press <Enter> to move the cursor to the type(s) of decode desired.
     4.  Press Tab to toggle the response to 'Y'.
     5.  Repeat steps 3 and 4 until all desired types of decode are enabled.
                                                                     2 of 2
The following notes apply if the specified table is in GE format:
     The user may enter all four tones, A, B, C, and D.
     Individual - Tones A and B must be programmed in the selected table.
     Group - Tones A and D must be programmed in the selected table.
     Super - Tones C and D must be programmed in the selected table.

The following notes apply if the specified table is NOT in GE format:
     The user may only enter tones A, B and C.
     Individual - Tones A and B must be programmed in the selected table.
     Group - Tones C and B must be programmed in the selected table.
     Quick - Tone B must be programmed in the selected table.
